View
Media Gallery
-
Description
The Elektor Arduino Nano MCCAB Training Board contains all the components (Arduino Nano is not included) required for the exercises in the "Microcontrollers Hands-on Course for Arduino", such as light-emitting diodes, switches, pushbuttons, acoustic signal transmitters, etc. External sensors, motors or assemblies can also be queried or controlled with this microcontroller training system.
Specifications
| Power Supply | Via the USB connection of the connected PC or an external power supply unit (not included) | ||
| Operating Voltage | +5 Vcc | ||
| Input Voltage | All inputs | 0 V to +5 V | |
| VX1 and VX2 | +8 V to +12 V (only when using an external power supply) | ||
| Hardware periphery | LCD | 2x16 characters | |
| Potentiometer P1 & P2 | JP3: selection of operating voltage of P1 & P2 | ||
| Distributor | SV4: Distributor for the operating voltages SV5, SV6: Distributor for the inputs/outputs of the microcontroller |
||
| Switches and buttons | RESET button on the Arduino Nano module 6x pushbutton switches K1 ... K6 6x slide switches S1 ... S6 JP2: Connection of the switches with the inputs of the microcontroller | ||
| Buzzer | Piezo buzzer Buzzer1 with jumper on JP6 | ||
| Indicator lights | 11 x LED: Status indicator for the inputs/outputs LED L on the Arduino Nano module, connected to GPIO D13 JP6: Connection of LEDs LD10 ... LD20 with GPIOs D2 ... D12 | ||
| Serial interfaces SPI & I²C |
JP4: Selection of the signal at pin X of the SPI connector SV12 SV9 to SV12: SPI interface (3.3 V/5 V) or I²C interface | ||
| Switching output for external devices | SV1, SV7: Switching output (maximum +24 V/160 mA, externally supplied) SV2: 2x13 pins for connection of external modules | ||
| 3x3 LED matrix (9 red LEDs) |
SV3: Columns of the 3x3 LED matrix (outputs D6 ... D8) JP1: Connection of the rows with the GPIOs D3 ... D5 | ||
| Software | Library MCCABLib | Control of hardware components (switches, buttons, LEDs, 3x3 LED matrix, buzzer) on the MCCAB Training Board | |
| Operating Temperature | Up to +40 °C | ||
| Dimensions | 100 x 100 x 20 mm | ||
