The OWON HDS2102s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 100 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc.
Features
- Oscilloscope + multimeter + waveform generator, multifunction in one
- 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
- 18650 lithium battery, can work continuously for 3-6 hours
- USB Type-C interface, support power bank, support PC software connection
- Self-calibration function
- SCPI supported, facilitate secondary development
Specifications
| Bandwidth |
100 MHz |
| Channels |
2-ch Oscilloscope + 1-ch Generator |
| Sample Rate |
500 MSa/s |
| Acquisition Model |
Normal, Peak detect |
| Record Length |
8K |
| Display |
3.5-inch LCD |
| Waveform Refresh Rate |
10,000 wfrms/s |
| Input Coupling |
DC, AC, and Ground |
| Input Impedance |
1 MΩ ±2%, in parallel with 16pF ±10pF |
| Probe Attenuation Factors |
1X,10X,100X,1000X,10000X |
| Max. input Voltage |
400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) |
| Bandwidth Limit (typical) |
20 MHz |
| Horizontal Scale |
2ns/div - 1000s/div, step by 1 - 2 - 5 |
| Vertical Sensitivity |
10mV/div - 10V/div |
| Vertical Resolution |
8 bits |
| Trigger Type |
Edge |
| Trigger Modes |
Auto, Normal, single |
| Automatic Measurement |
Frequency, Period, Amplitude, Max, Min, Mean, PK-PK |
| Cursor Measurement |
ΔV, ΔT, ΔT&ΔV between cursors |
| Communication Interface |
USB Type-C |
Multimeter Specifications
| Max. Resolution |
20,000 counts |
| Testing Mode |
Voltage, Current, Resistance, Capacitance, Diode, and Continuity test |
| Input Impedance |
10 MΩ |
| Max Input Voltage |
AC 750 V, DC 1000 V |
| Max Input Current |
DC: 10 A, AC: 10 A |
| Diode |
0-2 V |
Waveform Generator Specifications
| Frequency Output |
Sine |
0.1 Hz - 25 MHz |
| Square |
0.1 Hz - 5MHz |
| Ramp |
0.1 Hz - 1 MHz |
| Pulse |
0.1 Hz - 5 MHz |
| Arbitrary |
0.1 Hz - 5 MHz |
| Sampling Rate |
125 MSa/s |
| Channel |
1-ch |
| Amplitude Range (high impedance) |
20 mVpp - 5 Vpp |
| Waveform Length |
8K |
| Vertical Resolution |
14 bits |
| Output Impedance |
50Ω |
Included
- 1x OWON HDS2102s
- 1x Power adapter
- 1x USB cable
- 1x Passive probes
- 2x Crocodile clip cable
- 1x Set of multimeter probes (one red and one black)
- 1x User manual
- 1x Probe correction adjustment knife
Downloads
