-
Description
Wide Range Power Supply for Raspberry Pi
With the PiEnergy Mini, you can operate your Raspberry Pi with a voltage of 6 to 36 V DC. You can use the button integrated on the board to both power up and power down your Raspberry Pi.
Communication with the Raspberry Pi is via GPIO4, but this connection can also be cut by removing a resistor to use the pin freely. Thanks to the ultra-flat design, it can also be used in many housings. The pin header is included and not soldered on to keep the design even flatter.
Specifications
| Input voltage | 6 to 36 V DC |
| Output voltage | 5.1 V |
| Output current | Up to 3 A (active ventilation recommended for additionally connected loads) |
| Cable cross-section at the power input | 0.2-0.75 mm² |
| Interface to the Raspberry Pi | GPIO4 |
| Microcontroller | ATtiny5 |
| Further connections | 5 V fan connector (2-pin/2.54 mm) Solder pads for external on/off switch |
| Compatible with | Raspberry Pi 3, 4, 5 |
| Dimensions | 23 x 56 x 11 mm |
Included
- Board with mounted heat sink
- Pin header (2x5)
- Spacer, screw, nut
Downloads
You May Also Like
