DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4" color TFT display and a built-in rechargeable lithium battery for mobile use.
Specifications (Oscilloscope)
- The oscilloscope has a real-time sampling rate of 10 MSa/s and a bandwidth of 500 kHz.
- With complete trigger function (single, normal, automatic), no matter if you’re using periodic analog signals or non-periodic digital signals.
- Maximum measured voltage signal is 400 V.
- Equipped with efficient AUTO, the measured waveform can be displayed without cumbersome adjustments.
| Real-time sample rate |
10 MSa/s |
| Bandwidth |
500 khz |
| Input resistance |
1 MΩ |
| Coupling method |
AC/DC |
| Test voltage range |
400 V |
| Vertical Sensitivity (x1) |
10 mV-10 V |
| Horizontal time base range |
1us-10s |
| Trigger mode |
Auto/Normal/Single |
| Trigger type |
Rising edge/Falling edge |
| Waveform Freeze |
Yes |
| Automatic measurement |
Yes |
Specifications (Component Tester)
- The instrument can automatically identify and measure various transistors, including NPN and PNP triodes, N-channel and P-channel mosfet, junction mosfet, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components.
- Automatic detection of pin definition.
- Automatically analyze NEC protocol infrared code.
- Other functional modes: Including circuit continuity test, 0-40 V input voltage measurement, PWM output, 0-32 V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement, etc.
Specifications (Signal Generator)
- The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude.
| Sine wave |
1-100 KHz/0-3.3 V/50% |
| Square wave |
1-100 KHz/3.3 V/50% |
| Pulse wave |
1-100 KHz/3.3 V/0-100% |
| Triangle wave |
1-100 KHz/0-3.3 V/50% |
| Ramp |
1-100 KHz/0-3.3 V/0-100% |
| DC |
0-3.3 V |
Included
- 1x DSO-TC3
- 1x P6100 Oscilloscope Probe (100 MHz)
- 3x Test Hooks
- 1x Adapter
- 1x USB-C Cable
- 1x Manual
Downloads
