-
Description
Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi/Bluetooth and some other enhancements. It incorporates the brand new ATmega4809 8-bit microcontroller from Microchip and has an onboard IMU (Inertial Measurement Unit) LSM6DS3TR.
The Wi-Fi Module is a self-contained SoC with an integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.
The Arduino Uno WiFi Rev2 has 14 digital input/output pins (5 that can be used as PWM outputs, 6 analog inputs), a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with an AC adapter or battery to get started.
Specifications
| Operating Voltage | 5 V |
| Input Voltage | 7 V - 12 V |
| Digital I/O | 14 |
| Analog Input Pins | 6 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3 V Pin | 50 mA |
| Flash Memory | 48 KB |
| SRAM | 6.144 Bytes |
| EEPROM | 256 Bytes |
| Clock Speed | 16 MHz |
| Radio Module | u-blox NINA-W102 |
| Secure Element | ATECC608A |
| Inertial Measurement Unit | LSM6DS3TR |
| LED_Builtin | 25 |
| Length | 101.52 mm |
| Width | 53.3 mm |
| Weight | 37 g |
You May Also Like
