-
Description
The Arduino Nano RP2040 Connect is an RP2040-based Arduino board equipped with Wi-Fi (802.11b/g/n) and Bluetooth 4.2.
Besides wireless connectivity the board comes with a microphone for sound and voice activation and a six-axis smart motion sensor with AI capabilities. An RGB LED is available too. 22 GPIO ports (20 with PWM support and eight analogue inputs) let the user control e.g. relays, motors and LEDs and read switches and other sensors.
Program memory is plentiful with 16 MB of flash memory, more than enough room for storing many webpages or other data.
Technical Specifications
| Microcontroller | Raspberry Pi RP2040 | |
| USB connector | Micro USB | |
| Pins | Built-in LED pins | 13 |
| Digital I/O pins | 20 | |
| Analog Input pins | 8 | |
| PWM pins | 20 (Except A6, A7) | |
| External interrupts | 20 (Except A6, A7) | |
| Connectivity | Wi-Fi | Nina W102 uBlox module |
| Bluetooth | Nina W102 uBlox module | |
| Secure element | ATECC608A-MAHDA-T Crypto IC | |
| Sensors | IMU | LSM6DSOXTR (6-axis) |
| Microphone | MP34DT05 | |
| Communication | UART | Yes |
| I²C | Yes | |
| SPI | Yes | |
| Power | Circuit operating voltage | 3.3 V |
| Input Voltage (VIN) | 5-21 V | |
| DC Current per I/O pin | 4 mA | |
| Clock speed | Processor | 133 MHz |
| Memory | AT25SF128A-MHB-T | 16 MB Flash IC |
| Nina W102 uBlox module | 448 KB ROM, 520 KB SRAM, 16 MB Flash | |
| Dimensions | 45 x 18 mm | |
| Weight | 6 g | |
Downloads
You May Also Like
