-
Description
The Arduino Nano 33 BLE Sense Rev2 with headers is Arduino’s 3.3 V AI enabled board in the smallest available form factor with a set of sensors that will allow you without any external hardware to start programming your next project, right away.
With the Arduino Nano 33 BLE Sense Rev2, you can:
- Build wearable devices that using AI can recognize movements.
- Build a room temperature monitoring device that can suggest or modify changes in the thermostat.
- Build a gesture or voice recognition device using the microphone or the gesture sensor together with the AI capabilities of the board.
Differences between Rev1 and Rev2
- Replacement of IMU from LSM9DS1 (9 axis) for a combination of two IMUs (BMI270 – 6 axis IMU and BMM150 – 3 axis IMU)
- Replacement of temperature and humidity sensor from HTS221 for HS3003
- Replacement of microphone from MP34DT05 to MP34DT06JTR
- Replacement of power supply MPM3610 for MP2322
- Addition of VUSB soldering jumper on the top side of the board
- New test point for USB, SWDIO and SWCLK
Specifications
| Microcontroller | nRF52840 (datasheet) |
| Operating Voltage | 3.3 V |
| Input Voltage (limit) | 21 V |
| DC Current per I/O Pin | 15 mA |
| Clock Speed | 64 MHz |
| CPU Flash Memory | 1 MB (nRF52840) |
| SRAM | 256 KB (nRF52840) |
| EEPROM | None |
| Digital Input / Output Pins | 14 |
| PWM Pins | All digital pins |
| UART | 1 |
| SPI | 1 |
| I²C | 1 |
| Analog Input Pins | 8 (ADC 12 bit 200 k samples) |
| Analog Output Pins | Only through PWM (no DAC) |
| External Interrupts | All digital pins |
| LED_BUILTIN | 13 |
| USB | Native in the nRF52840 Processor |
| IMU | BMI270 (datasheet) and BMM150 (datasheet) |
| Microphone | MP34DT06JTR (datasheet) |
| Gesture, light, proximity, color | APDS9960 (datasheet) |
| Barometric pressure | LPS22HB (datasheet) |
| Temperature, humidity | HS3003 (datasheet) |
Downloads
You May Also Like
